The key to cozy and warm housing is natural raw materials based on natural components. One of such representatives of finishing materials is considered to be lumber. They are aesthetically pleasing and give the room a unique style.
To further reduce the cost of the design process, calm pine lining is used. Let's consider what it is, what it is intended for and where it is used, as well as its advantages.
Shtil lining is a modern finishing material in the form of a panel, which is successfully used for finishing the internal vertical and horizontal planes of a room. Looks good when decorating residential and office premises, in particular their corridors.
On websites about finishing, you can look at photos of Shtil lining and analyze how it looks in one or another combination. It is thinner than other lining.
When assembled on a plane, there are no recesses at the joints. As a result, you get a flat plane without visible traces of fastening.
Standard sizes
There are standard sizes of Shtil lining, which are slightly larger than other models. Let's take a closer look:
- domestic versions have a profile width from 90 to 150 mm and a thickness from 12 to 25 mm;
- foreign versions have a profile width from 80 to 140 mm and a thickness from 12.5 to 21 mm.
Their length varies from 2 to 6 meters. This allows you to make a smooth and solid plane.
Installation of VSh
The lining is installed vertically or horizontally. Both installation options are used for interior work. When covering facades, the profile is installed horizontally. Before finishing the fences with clapboards, a support base is prepared for the wooden panels.
Timber sheathing is attached to the walls and ceiling . For this, lumber with a cross section of 30x30 mm, 30x40 mm and 40x40 mm is used. Larger cross-sections of slats are used for significant volumes of work on one plane. The timber is tied with mounting metal corners. The corners are attached to the walls and ceiling with dowels, and to the beams with screws.
The junctions of the cladding with the floor and ceiling are covered with plastic or wooden skirting boards. For vertical external and internal corners, polymer profiles designed for plastic panels are used.
Three ways to attach the VSh
Nails or screws
Fasten the bottom flange of the groove. Small nails are driven at an angle with a hammer with an extension into the bottom shelf of the groove. The screws are screwed into the head using a drill. Installation of horizontal panels is carried out from top to bottom. This method requires skill and dexterity from the worker.
Pneumatic stapler
You don't have to buy the tool; you can rent it. The stapler allows you to quickly “shoot” the lining to the sheathing. This method is only suitable for cladding fences inside the house. Horizontal installation is also done from top to bottom. Vertical installation of "Calm" begins from the corners.
Installation of VS on clamps
The most progressive method of installing VSh is to fasten the panels with clamps. The mounting part is a bracket having a shelf with holes and a curved toothed platform (tooth).
Installation begins from the bottom row of the lining with the groove up . It is attached directly to the beam with screws. Then the clamps are immersed with their serrated ends into the groove. The fastening areas are nailed with nails, screwed with self-tapping screws or stapled to the sheathing.
The next row is inserted with tenons into the grooves of the lower panels . The upper lining is punched with a rubber hammer until the protrusions fit tightly into the grooves. The process is then repeated until the final cladding is completed.
Moisture resistance of lining
Considering its design capabilities, we can say that this product is significantly more resistant to moisture than its conventional counterparts.
On the reverse side of the profile it has shallow depressions that are longitudinally located. They provide ventilation for the entire structure, minimizing the occurrence of various fungi and mold.
Which color to choose
The lining will easily fit into any style if you choose the right color.
- White . The simplest and most versatile option that will go perfectly with furniture and decor of any color. White lining looks especially good in Scandinavian, Mediterranean and minimalist styles.
- Wood tones. All natural shades of brown in a clapboard finish will best fit into the interior of a country house in a rustic style. It is better to choose furniture and other finishes for wood paneling in the same natural shades - terracotta, white, mustard, beige.
- The pastel colors of the lining are simply created for an interior in the Provence or shabby chic style. Lavender, blue, mint, pink and other delicate shades will highlight the charm of these styles. Pastel lining will look no less good in a children's room or bedroom.
- Dark colors. Dark brown, emerald, burgundy or even black lining can also be successfully integrated into a country or city interior. It will be best combined with styles such as loft, scandi or English country. To prevent the room from turning out too gloomy, alternate the lining in the decoration with other materials such as plaster or light brick, and give preference to furniture in light shades.
Lining of any color in the decoration itself attracts more attention than plain wallpaper or paint. Therefore, if you use it to decorate your apartment, then you should make the decor more minimalistic. And in order to add air to the room, use open shelves and racks instead of massive cabinets.
In our online store you will find thousands of aesthetic decorative items that will fit into any style - from Provence to loft. Revive your home and give it a picture-perfect look with bright textiles, beautiful paintings, stylish figurines and other decorations. Shopping at Lavender Decor is not only pleasant, but also profitable - when ordering decor on our website, you receive bonus points that can be used to pay for up to 50% of your next purchase.
Go to the DECOR section
Angarsk pine
This tree grows in the taiga, in an ecologically clean environment, and is characterized by the absence of any negative chemical compounds. Calm lining made from Angarsk pine has the following features:
- able to withstand significant temperature changes;
- has low thermal conductivity;
- has increased strength;
- extremely minimally susceptible to decay;
- is widely used for cladding walls, ceilings and doors;
- this material “breathes” and emits a fresh forest aroma;
- Helps purify indoor air.
Useful tips for the master
It is best to cut lamellas with a hand-held circular saw at high speed. This tool allows you to make an even cut without the risk of chips, cracks, or the blade moving to the side.
Treatment of wood with antiseptics, waterproofing agents and other protective agents occurs only after preliminary cutting and fitting of the lamellas.
The installation of sockets is carried out at the junction of the lamellas - this way you can avoid excessive torsion or cracks during cutting inside the board.
Many manufacturers coat their products with protective compounds before sale. This does not mean that you won’t have to apply an antiseptic to the slats - protection against moisture in a warehouse is noticeably different from antifungal protection in an apartment.
It is necessary to carefully select fastening material. Cleaver staples also differ in their characteristics. It is worth choosing wide brackets made of galvanized iron with 2-4 holes for self-tapping screws. High-quality fastening - durable coating.
Calm lining in the interior of any room is a noticeable plus for the atmosphere. Timely care and replacement of defective sheets will extend the life of the repair in the room.
Decorative properties
The material has amazing properties when installed in vertical and horizontal directions. This makes it possible to visually manipulate space. There are possible options:
- light panels directed from bottom to top - visually increase the height of the ceilings;
- a dark panel that is attached across reduces the visible volume of the room.
There are many options for improvisation. With this material you can create the desired appearance of space.
Processing quality
Tools for high-precision wood processing are used at every stage of creating lamellas. Grinding is done with fine sandpaper, the locks are turned with a special high-precision cutter on an automated machine. The finishing coating and adjustment of the lamellas serve to produce identical lamellas, which differ only in the pattern on the front side.
The high quality of processing makes Calm not only a desirable material for wall decoration, but also a raw material for creating furniture, design projects, smooth table coverings, work surfaces, etc.
Advantages of lining
This lining has a significant variety of shades and does not require additional painting. It is quite dense, which gives it a long service life. It is distinguished by its advantages:
- attractive aesthetic appearance;
- possibility of condensate drainage;
- minimum amount of waste;
- ease of fastening;
- fixation strength;
- wide variety of sizes offered;
- sufficient strength;
- affordable price.
Short review
What is lining?
Initially, these are thin wooden cladding boards of a certain size. They are connected to each other using grooves and tenons. They can be used for finishing the external and internal surfaces of living rooms, baths, saunas, balconies and other premises. The name is associated with the process of development of railway communication. In passenger cars, the interior lining was made of wooden planks. This made trips more comfortable, because wood, by its natural properties, resists heat and cold, dryness and humidity better than other materials.
Now lining is a thin profiled board, although not always made of wood.
Buying lining
When considering the question: where to buy Shtil lining, you should go to specialized sites offering its sale and familiarize yourself with the services offered, pricing policy, delivery options and conditions. It’s quite easy to choose the best option and get the long-awaited result.
As you can see, Shtil lining is a high-quality material that is used in modern finishing and has a number of undeniable advantages. Use this high-quality material and create a comfortable and cozy environment in your home!
Varieties
The “calm” lining is divided into grades according to its quality. The grade is determined depending on the class of raw materials used, the appearance of the front side, the number of knots per 1.5 linear meters of surface, and the type of wood. There are 4 varieties.
- “Extra” grade boards are characterized by excellent quality, high thermal conductivity and good appearance. Knot-free spliced lining is a material of this type. In this case, the wood material does not contain a single knot, the surface is smooth, clean, and there are completely no defects. The color and texture of the wood are stable. Board length up to 5 meters.
- Grade "A". In this class, 1 knot per 1.5 linear meters is allowed. Often, boards of this type of certain types of wood (pine, larch) may not differ from the highest class. The length of the board is up to 3.8 meters.
- Grade "B". There can be up to 4 knots and 2 pockets of resin per unit length of measurement. The length of the board is up to 5 meters. Most often used to cover floors.
- Grade "C". This grade is economy class lumber. There may be knots, cracks, and blue spots. Used in utility rooms, utility rooms, technical buildings. For “calm” lining such material is used extremely rarely.
