Siding in the bathroom: use for interior decoration, interior photos, etc.

Not so long ago, almost the only material for finishing a bathroom was ceramic tiles. The construction industry does not stand still; new materials are constantly emerging. Many people use siding in the bathroom to decorate walls and ceilings, this is explained by its practicality, durability and low price.

Bathroom finished with siding.

Performance properties of siding

Modern PVC panels (also called siding or lining) help create a different style in any room, but are most often used to decorate the bathroom. High moisture resistance, correct geometric shape, simple and reliable connection make it possible to finish a bathroom with siding without extra time and special skills.

There are several types of such material:

Rack and pinion. Most often they are used to decorate the ceiling, but the slats are also suitable for cladding walls. The width of the slats is 100-125 mm, and the length is 3 m. The slats are connected to each other using a locking connection, which can be wide or narrow. Plain colors or colors imitating wood or other materials are common.
Standard. In this case, the width of the panels is 250-370 mm, and the length is 2.6-3 m. Tongue-and-tongue locking connections allow for quick and reliable installation. The coating can be plain, imitate other materials, or have a pattern or photo printed on it.
Sheet. The width of the lamella is 203 mm, and the length is 4.05 m. Finishing with such sheets is done end-to-end, then the seams are filled with sealant in the color of the material. They are most often mounted on a flat surface using glue, but they can also be installed on the sheathing.

Depending on the connection method, the panels are:

Seamless. Most often they are used to decorate the ceiling. The tight fit of the panels to each other ensures minimal seams.
With chamfer. Their difference is that there is a chamfer at the junction. They are used for finishing walls and ceilings.
With decorative surface. Externally, such panels resemble natural lining, but cost more than previous options.

Finishing the bathroom with white siding.

Conclusion

Installing siding is much easier than, for example, laying ceramic tiles on a wall. At the same time, the finish is beautiful, practical and durable. The only thing is that the work must be done carefully and carefully so that the walls are smooth and strong enough.

You can learn more about how siding is installed from the video in this article. If any points are unclear to you or difficulties arise during the work process, ask questions in the comments, and I will be happy to answer you.

If previously, mainly tiles were used to decorate walls in bathrooms, today the choice of materials is varied.

Bathroom finishing with plastic

If you want to make repairs quickly and inexpensively, you should consider the option of finishing the bathroom with plastic.

Advantages and disadvantages of cladding

Siding for bathroom interior decoration is made of polyvinyl chloride, which provides it with high resistance to high humidity.

In addition, this finishing material has the following advantages:

low cost (anyone can buy it);
a large selection of colors (this allows you to choose the material to suit any interior);
long service life (mold and mildew do not form on it);
high heat and sound insulation characteristics (when installing the frame, it is possible to lay an additional layer of insulation and further increase these indicators);
environmental friendliness (the materials and technologies used in production make such material completely safe for humans);
simplicity and speed of installation (this does not require special tools or special skills - even a beginner can cope with the work);
ease of use and maintenance (just wipe the panels with a sponge dipped in soapy water).

Like any building material, siding also has some disadvantages:

fire hazard (although the panels do not support open fire, they emit toxic smoke when burning);
deformation (at sub-zero temperatures);
reducing the space of the room (when installed on a frame);
relatively low strength.

Bathroom finishing.

Budget material

Many cannot afford expensive bathroom renovations, and in order to save money, they prefer to use budget materials and do the work themselves, without the help of specialists. It is worth noting that cheap finishing is rarely of high quality, and, as a rule, the service life of budget materials is not so long.

Budget materials for interior wall decoration include:

waterproof paint;
waterproof wallpaper;
drywall;
decorative plaster.

However, if you use your imagination, you can make a beautiful and original renovation using budget materials.

A common method is to paint the walls, but for the painting to look beautiful, the walls must have a perfectly flat surface. The paint must be moisture-resistant and washable.

Painted walls in the bathroom.

You can cover the walls with waterproof wallpaper or film, but this is not the most practical way. The film is easy to apply, but to use it, just like for paint, the walls must be smooth and even.

When gluing the film, it is very important that there are no bubbles under it, otherwise it will “fail” even earlier than it should.

Decoration with self-adhesive film.

If the walls are uneven, then you can use waterproof plasterboard. It can also be painted or covered with film.

Waterproof drywall.

To give the bathroom an original look, you can use decorative plaster (for example, putty), including in combination with painting.

Decorative plaster in the interior of the bathroom.

Wide range of possibilities in interior design

Siding is a universal material, so it is used to decorate any room indoors:

Bathroom. Due to its availability and ease of installation, siding has replaced such a popular finishing material as ceramic tiles. A bathroom decorated with it not only looks beautiful, but is also inexpensive. In this case, all the work can be done independently. The result is a practical coating that does not accumulate dust and dirt.
Balcony or loggia. Here, this material not only gives the room an attractive appearance and practicality, but also improves the heat and sound insulation characteristics of the surfaces on which it is installed.
Corridor. Siding is used to cover the walls completely or half their height. Finishing the corridor with such material makes it presentable and practical. In addition, it makes cleaning easier because... There is always more dirt and dust in the hallway than in other rooms of the house.
Ceiling. This material can be used in any room. In addition to high aesthetic qualities, siding allows you to hide existing communications (electrical wiring, pipes, etc.).

How much will it cost: price comparison

Cost is a very important issue. Siding is an inexpensive facing material, and there are a lot of manufacturers on the market (for every taste and budget). HAUBERK facade tiles are in the same price category. The final cost of a cladding system with HAUBERK facade tiles is slightly higher than the average cost of vinyl siding. However, in terms of quality, HAUBERK façade tiles clearly win.

To summarize, we can say that HAUBERK facade tiles are a good alternative to the usual vinyl siding and successfully compete with it in terms of price/quality ratio

When choosing a material for finishing a country house, it is important to “weigh” the pros and cons of each of them, taking into account that durability largely depends on the composition of the raw materials and compliance with production technologies. A quality product cannot be cheap

Bathroom installation options

Before finishing a bathroom with siding, you need to calculate the required material. To do this, multiply the width by the length and determine the surface area on which the work will be performed, adding a 10% margin.

If the repair is carried out without removing the plumbing, then cover the bathtub, washbasin, pipes, etc. with film. When installing the panels, the wooden frame, as well as the surface of the walls and ceiling, must be treated with antifungal agents. Old finishing material is removed from the walls. If the siding is installed on a frame, then there is no need to prepare them additionally.

The following techniques will help to visually increase the area of a small bathroom and make its design beautiful and unusual:

The main surface of the walls is finished with light-colored plastic, and darker colors are used in the corners.
They focus on one of the walls - for this purpose it is decorated in a brighter color.
Dark-colored panels are installed in places where mirrors and other accessories are installed.
Light-colored siding is used to decorate a small bathroom.

Using an adhesive composition

If the walls in the bathroom are almost flat, then it is easier to install the siding using glue. The surface is first cleaned of dust, then sanded to ensure good adhesion of the materials, and primed. This solution allows for quick installation and does not take up free space, making it suitable for small spaces.

Frame method

If there are irregularities on the walls, it is better to choose installation on a frame. Although installing the sheathing requires additional time, effort and money, it does not require leveling the walls, which compensates for these inconveniences. Installation is carried out on both wooden and metal sheathing.

The disadvantage of this method is that the size of the room is slightly reduced, but if the bathroom has sufficient area, then it can be ignored.

Plastic for finishing

If you are choosing a finish for the bathroom, then preference should be given to materials that have the following properties:

Resistant to moisture and water vapor. The bathroom is a place where water is used every day, so splashes on the walls are almost inevitable.
Strength. The material must be resistant to mechanical stress.
Hygiene. The wall covering in the bathroom should be easy to wash and clean.
Durability. It is clear that no one wants to make repairs every year, so you should choose materials that can last even a year.

Selection of plastic panels

An important stage of the work is the purchase of materials.

To purchase high-quality panels, you need to pay attention to the following points:

The more stiffening ribs there are in the siding, the stronger and more reliable it is.
You cannot buy material if the locks or lintels on it are deformed.
The coloring should be evenly applied to the entire surface, the design should be clear and unblurred.
The image when joining the panels should turn out beautiful, undisplaced.
There should be no bubbles, cracks or other defects over the entire surface of the plastic.
Locks must provide a reliable and durable connection (gaps are not allowed).
The dimensions of the panels must strictly correspond to the parameters declared by the manufacturer, otherwise there will be problems during their installation.

Be sure to request a quality certificate to ensure that the siding you purchase is intended for interior use and is safe for humans.

Plastic panels for the bathroom.

Vinyl tile adhesive

To install ordinary vinyl tiles, you need a good adhesive, because to hold the product on the wall you need excellent adhesive ability. Acrylic glue is best suited for this procedure, because its mixture is similar to the contents of the finish.

Liquid nails are also suitable. Adhesive for PVC tiles on the wall is applied in a thin layer to the underside of the tiles. If it is necessary to cut or trim material, it is time to do this with ordinary, reliable scissors.

Considering that the corners in rooms can be uneven, in order to avoid visible distortions, experts advise starting to glue the material from the middle of the room wall and further into the circle. After laying all the tiles, you will need to roll them with a roller and wipe off excess glue. Walls can be washed two days after gluing.

Instructions for tiling a bathroom

Installation of PVC panels is not difficult, so you can do this work yourself. If you decide to cover the entire room with siding, you should first install it on the ceiling, and then move on to finishing the walls.

Installing siding with glue

It is necessary to prepare the following materials and tools:

antiseptic primer;
roller and tray;
glue;
hacksaw and construction knife;
tape measure and pencil;
building level.

After cleaning the walls from the old coating, they must be properly leveled, wait until the putty dries, and cover them with a primer. On the ceiling, siding is most often mounted on a frame to hide the communications there (cable, pipes, etc.).

Work on gluing the panels begins with the installation of starting profiles (do this in the corners of the bathroom). The verticality of their installation is controlled using a level or plumb line. You can do the work without starting rails, then the joints should be closed using decorative corners.

They mark and trim the panels, which are mounted vertically, so they are cut to height.

One of the finishing options.

Further work is performed in this order:

evenly coat the first panel with glue;
insert it into the starting element and press it against the wall over the entire surface;
smear the next panel with glue, insert its groove into the tenon of the previous one and press it against the wall;
the last element is cut to width from the groove side and, slightly bent, inserted into the opposite starting profile;
The joints with the bathroom are taped with a special tape or a border is installed, and a plinth is installed.

It is necessary to remove the protective film from the panels only after installation is complete, otherwise they may be damaged.

Frame installation

This method allows you to hide all the irregularities on the wall and does not require additional preparation.

You will need the following materials and tools:

metal profiles, brackets, etc.;
wooden blocks (they must fit into the metal profile);
primer;
metal scissors;
hacksaw;
tape measure and pencil;
screwdriver

Creating a frame is similar to what is prepared for drywall (only the profile is installed horizontally), and consists of the following steps:

Guide profiles are installed in the corners.
Places for mounting horizontal elements are marked on the walls and brackets are attached.
The profile is inserted into the guide elements and fixed using brackets.
In places where shelves or other furniture are installed, the profiles are reinforced with wooden blocks.
Mark the panels and cut them to size.
The profiles are mounted in the same way as in the previous case, only instead of glue to the frame they are fixed with self-tapping screws.

The popularity of siding when covering bathroom walls is explained by the fact that its installation is much easier and faster than ceramic tiles. If everything is done correctly, the result is a smooth, beautiful and practical surface.

Accessories

When purchasing PVC panels, the kit should include additional accessories:

The base is the starting element from which the installation of the cladding begins.
Profiles – used to design soffits, corners, window and door openings.
External corner - used to design external corners.
Internal corner – design of internal corners.
Connecting element – used to form panel joints.
Finishing strip - used to decorate the top part of the cladding.
Window strip – together with profiles, it is used to decorate windows and door openings.
Platbands - can be used instead of a profile.

Paint instead of tiles

The bathroom is a rather special room because it is where there is both high humidity and frequent temperature fluctuations. Tiles seem to be the most practical in such spaces. However, this is not entirely true... You can replace it with modern paints that are resistant to water, abrasion and detergents. These paints have a number of advantages that make them superior to ceramic tiles in some respects.

Paint can be quickly applied to the wall with your own hands. When choosing tiles, we most often use the services of a tiler, which significantly increases the cost of repairs. The benefits of paint may also include the fact that if you change your mind about the color, you can change it quickly and inexpensively. However, you cannot use the same paint to paint the walls as you would in the living room. Most often used: latex - acrylic, ceramics. In industrial stores they are called kitchen and bathroom paints.

Installation

...on glue

In order to finish a bathroom with siding with your own hands, there are several ways, one of which is installation with an adhesive composition. This method is used less frequently than installation on the lathing and this is due to the fact that several conditions will have to be met for gluing.

The first and most important thing is to create perfectly smooth walls, and secondly, there should not be a high level of humidity in the room.

If you carry out a major renovation with leveling the wall, replacing all communications and plumbing fixtures, you will need to take into account three nuances:

Before installing the material, all wiring for switches and electrical outlets should be removed.
If you install the material with adhesive, you will still have to create a sheathing around the drain and pipes to disguise them.
When laying panels on the ceiling, you will need to immediately determine the location of the lamps; it is advisable to choose low-power spotlights so that the siding does not melt in the future when using lighting.

And a little more about lighting. If you need to create additional lighting, you can install sconces or lights on the mirror and shelves. Siding is a durable material, but it deteriorates at high temperatures since it is plastic.

Tools and accessories

Before you start work, you should prepare the material and tools that you will use when installing siding on the walls:

Siding panels.
Adhesive composition for mounting PVC panels on the wall.
A utility knife so that you can trim the panels if necessary.
Trowel (it will be convenient for them to apply glue to the material).
Old rags to wipe the material and remove excess glue.

If you need to use hardware, then you will have to stock up on a screwdriver or drill.

Please note that trimming the panels is required before starting work. Drilling or cutting must be done from the outside, as otherwise the plastic will have burrs.

Selection of glue

For siding panels, there are several types of glue that can be used to install the material:

When choosing an adhesive composition, pay attention to the functions. For example, some compositions can protect from ultraviolet radiation, are moisture resistant, etc.

You should choose glue according to your needs. If you want to buy formulations with a natural base, be prepared to pay more, but you will be completely sure that they are hypoallergenic and harmless. For the ceiling it is better to use a universal polymer composition.

Important! If there are small errors on the walls, then the best option would be to use liquid nails, which have high elasticity. Due to this, you will be able to visually level the wall and prevent the material from deforming.

Preparing the surfaces

The main condition is to make the surface smooth. It is impossible to install siding on curved walls, as it can deteriorate, become deformed, and then the appearance of the room will not be what you expected.

Before you start decorating your bathroom with siding, you will need:

These three simple steps will help you maintain your finished result for a long time.

Progress

Once you have calculated the amount of material that will be needed, the main surface is ready and the siding is cut, you can begin. Start applying the adhesive to the wall or to the back of the panel. Experienced builders recommend applying glue only to the panel to avoid overuse and glue running down the wall.

When everything is done, the panel should be carefully applied to the wall and pressed evenly for a few seconds. When the panels are completely dry, the work is considered completely completed. Drying time depends on which manufacturer made the glue, as well as on the room temperature and humidity level. It is not recommended to use the premises for your needs until the panels are completely dry. Changing temperature and steam conditions can negatively affect a wet surface.

...on the frame

The second and more common option for installing siding panels is to mount them on the sheathing. This means the preliminary installation of the frame on the main surface, and then the panels are mounted on the frame. This method is often used in the bathroom, especially if the walls are uneven. Making a screed is expensive, and the worse the surface, the more material and money will be spent on leveling.

When installing sheathing, you will not need to level the walls, and you can save money.

Unlike installing drywall, siding can be installed on any wall, since it does not require additional reinforcement due to its low weight. The frame comes in two types - made of a metal profile or wooden.

You can also find special plastic profiles for installing lining on sale.

If you decide to make the sheathing from wood, it should be treated in advance with antiseptic agents so that it does not mold or rot in the future due to high humidity. Wood is a natural material, so it is susceptible to mold and mildew.

Frame manufacturing

The frame is used only when the surface is uneven. Before installing the sheathing, the walls should be treated with various compounds and antiseptics. The frame should be installed perpendicular to the installation of siding. It turns out that if you lay the siding vertically, then the profiles - horizontally, and vice versa. Corners should be installed along all openings, into which the sheathing will then be installed.

Installation

How to install siding in a bathroom? Each panel of material has a groove, i.e. fastening part. When installed on the sheathing, the panels are fastened between the frame and the profile using self-tapping screws. There is nothing complicated about this, so even a beginner can cope with this task. Finishing a bathroom with panels does not take much time, and thanks to this, renovation work can be completed within a few days.

The advantage of the lathing is that no adhesive is needed, which means drying is also not required.

In the end, we note that siding panels are one of the most popular materials for finishing non-residential and residential premises. It is relatively inexpensive, easy to install, has a long service life and looks great. It is used to decorate the toilet, bathroom, work wall in the kitchen and other rooms.