Which circular saw to choose for your home - rating of the best models

A circular saw is a versatile tool that is often used when cutting wood. Today there are a huge number of such devices. Therefore, before purchasing, you need to carefully study the rating of circular saws for the home and choose the most suitable tool from it.

A circular saw is an indispensable tool for working with wood.

Types of circular saws

Depending on the design of the tool, the following types can be distinguished:

• Stationary. Suitable for installation in production halls or workshops.
• Tabletop. More compact models that are much easier to transport. Such circulars can be installed on any table.
• Manual. The most compact saws used for cutting small amounts of wood.

Additional Information! At home, manual and tabletop models are most often used.

Best Budget Sawing Machines

The category includes models costing no more than 15,000 rubles. They are small in size and designed for occasional use at home or in a private workshop.

Stavr PDS-250/2000

4.9

★★★★★

editorial assessment

95%

buyers recommend this product

The ability to adjust the sawing angle on this machine facilitates comfortable processing of workpieces of complex shapes. The protective cover eliminates the possibility of injury and protects the owner from chips.

The motor power is 2000 W, the disc diameter is 254 mm. The dust extraction system can be connected to a vacuum cleaner to keep the work area clean. The magnetic switch reduces the risk of spontaneous activation of the machine during power outages.

Advantages:

• powerful engine;
• ease of maintenance;
• parallel stop;
• cutting angle adjustment;
• rich equipment.

Flaws:

• heavy.

Stavr PDS-250/2000 is suitable for frequent use in a carpentry workshop.

Kraton WMTS-6-02

4.9

★★★★★

editorial assessment

94%

buyers recommend this product

The presence of two stops and a protractor ensures comfortable and accurate work with large-sized workpieces. The ability to tilt the saw blade at an angle of up to 45° facilitates convenient sawing of parts with complex joints. If necessary, it will be possible to increase the size of the table.

The spindle speed is 2800 rpm, the motor power is 1000 W. The start button is protected from dust and moisture, the wide casing protects the operator from chips and guarantees safety. The machine does not require special maintenance.

Advantages:

• additional table;
• safety of use;
• long service life;
• durable body;
• neat cut

Flaws:

• short cable.

Kraton WMTS-6-02 is intended for regular woodworking in a home workshop.

Einhell TH-TS 820

4.8

★★★★★

editorial assessment

88%

buyers recommend this product

The model is equipped with a special shield - it protects the disk from external influences and guarantees the safety of the master during the work process. The presence of a parallel stop contributes to more accurate and accurate sawing.

The cable mount ensures convenient transportation of the machine, and mounting holes in the housing simplify installation. Plastic feet absorb vibration when operating the tool.

The table dimensions are 500x335 mm, the weight of the equipment is almost 11 kg. Other features include the ability to adjust the angle of the disk.

Advantages:

• precise cut;
• measuring scale;
• vibration resistance;
• safety of use.

Flaws:

• low power.

Einhell TH-TS 820 is suitable for processing wood or fiberboard workpieces. An excellent choice for a small workshop.

Caliber EPN-900

4.8

★★★★★

editorial assessment

87%

buyers recommend this product

The model's table is equipped with a parallel stop and a ruler, which allows you to work more accurately. Small dimensions and weight make it easy to carry and place the machine in cramped environments. Double insulation of the drive guarantees high electrical safety.

The motor power is 900 W, the surface dimensions are 500x335 mm. The disc can be tilted up to 45°. Smooth adjustment of the cutting depth ensures comfortable cutting of workpieces of various thicknesses.

Advantages:

• compactness;
• possibility of tilting the disk;
• long service life;
• long cable;
• precise cut

Flaws:

• small saw blade diameter.

The EPN-900 caliber is designed for working with wood blanks at home.

READ ALSO

6 Best Surface Grinders

Specifications

Before choosing a circular saw for your dacha, you need to familiarize yourself with the main technical characteristics of this tool.

Motor power

Stationary circular saws are considered the most powerful.
The performance of the saw depends on this parameter. The higher the power, the thicker the tree the circular saw can cut. Depending on the power of the electric motor, saws are divided into three types:

• Up to 1000 W. Suitable for sawing plywood.
• Up to 1500 W. With their help you can cut logs, thick boards and wooden beams.
• From 1500 W. Professional tools that can work 5-8 hours a day.

For home use, it is better to choose budget models with a power of 1000-1500 W.

Disc rotation speed

This indicator affects the speed of the circular machine. For people who plan to frequently process hardwood, it is recommended to use models with high disc rotation speeds. This will allow you to make better cuts.

The average rotation speed is about 5000 rpm. Many professional saws speed up to 6500 rpm.

Cutting depth

Angle cutting is often used when working with dense wood.
Another criterion that is taken into account when purchasing a circular saw is the cutting depth. This parameter depends on the diameter of the cutting disc used and the power of the device. For household models, the maximum cutting depth is no more than 55 mm.

If a person has to work with denser materials, it is necessary to use professional saws. With their help, it will be possible to saw wood with a thickness of more than 80 mm.

Working at an angle

Many people who choose a new circular saw for their home pay attention to whether it can be used to work at an angle. It is recommended to buy models that can be used at an angle when cutting products.

To determine that a saw can be used at an angle, you need to inspect its design. It must have a locking mechanism.

Which sole is better

Often people are confused about choosing the best circular saw blade. Many experts claim that the cast platform is the most reliable. However, such circulars are very expensive and few can afford them.

A cheaper and more accessible option is products that are equipped with forged platforms. They are quite tough and thick. The quality is practically in no way inferior to more expensive cast platforms.

Battery type

Cordless models are suitable for outdoor work.
At home, cordless models are often used. These cordless saws are very convenient and allow you to cut wood even in hard-to-reach places. There are two types of batteries that are often used in power tools:

• Lithium-ion. Modern batteries that drain slowly. The only drawback is poor frost resistance.
• Nickel-cadmium. Outdated but still in use batteries. They are rarely installed in circular machines, as they quickly discharge.

Important! It is recommended to choose models whose battery has a voltage of at least 18 V.

Do you need a level or a laser pointer?

Devices equipped with an additional laser pointer are often added to the ratings of circular saws. This device is very useful, as it indicates the direction of movement of the circular. Therefore, for beginners who have not previously used such tools, it is better to give preference to models with a laser pointer.

Is speed adjustment necessary?

The speed controller allows you to adjust the rotation speed of the disk.
When choosing a new circular saw, you need to pay attention to whether it has additional functions. It is recommended to buy models that are equipped with a speed controller. Using this device, a person will be able to manually adjust the rotation speed of the working disk. This is very convenient when you have to cut materials of different densities.

Do you need a soft start?

Another additional function that should be in a circular machine is soft start. With its help, you can gradually increase the engine speed and, accordingly, the disk rotation speed. Of course, using this function increases the cutting time. However, in this way it is possible to protect the motor from sudden voltage changes.

Performance characteristics

In addition to the different prices of the equipment, electric wood saws can be powered from a household electrical outlet or from connected batteries. Each case has its own advantages and disadvantages, because stationary devices are more powerful, but are more expensive and not mobile, and circular machines with a battery, although less powerful and have a limited period of operation, can work in any conditions without access to the network.

Cordless circular saw BOSCH Professional GKS 10.8 V-LI/12V-26

Based on power, a division is made between the following types:

• high-power – more than 1.2 kW;
• medium-power – 0.8-1.2 kW;
• low-power - below 0.8 kW.

Preferences should be given depending on the expected thickness of the workpieces. The larger the beam, the more powerful a motor is needed to cut it.

Rotation speed and bore diameter are also related. For smaller diameter landing shafts, a faster tool is needed. In this situation, you can get by with an 800 W motor. For larger-diameter circular saws, the speed should be slightly lower so that the cutting edge on the outer diameter does not burn and ensures optimal cutting speed.

It is important to consider additional parameters that affect comfort, facilitate operation and help make the circular machine as safe as possible:

• Smooth start. The option pursues two goals, one of which is to take care of the operation of the electric motor, and the second is to minimize voltage surges in the network. The functionality is especially useful for powerful and stationary equipment.
• Start blocking. The device does not allow the tool to be launched accidentally, which has a positive effect on the safety of the model.
• Collection of shavings. The sawing process generates a significant amount of small waste. They must be removed in a timely manner in order to operate comfortably and safely. Some models allow you to connect a vacuum cleaner to collect sawdust.
• Laser for marking. It helps when unraveling long pieces along the central axis. This way you will get the smoothest possible edges.

The cutting disc can come with the power tool, and sometimes it needs to be purchased separately, in which case the price will be slightly higher. The following blades come with circular saws:

• With tipped carbide teeth. This type of disc is suitable for cross-cutting and processing of hardwood. The models are highly resistant and durable, but require careful handling due to the fragility of the material.
• Variable tooth sizes. This variety is used for longitudinal processing along the fibers. In most cases, a small saw cut thickness is formed.
• Universal type made of high speed material (HSS) with classic routing. The most common disk option, which is used in most cases.

It is preferable for young professionals to choose popular brands with universal characteristics. More experienced craftsmen have several different tools, such as a jointer or a planer, for different types of work.

Which circular saw to choose for your home or garden?

Many people do not know how to choose a circular saw for their home. To make the right choice, you need to decide how often the tool will be used:

• for regular use - a model with a power of 1500 W or more and a cutting depth of at least 55 mm is suitable;
• for rare use and cutting thin boards - manual circular saws up to 1000 W.

Important! If you are choosing a saw for construction, it is better to buy a professional model from a well-known company.

Choosing the right model

Choosing the right wood sawing machine ensures maximum efficiency, productivity, and convenience.

To make the right choice, you need to take into account the types and volumes of future work, all the capabilities and characteristics of the tool:

• power. Wood processing in domestic conditions is possible with a power of 350 watts, in industry - from 2000 watts, in sawmills volumes can reach 15,000 watts;
• depth of cut. The minimum indicators are 40 mm. Production machines can handle thicknesses of 360 mm or more;
• cutting width. This indicator affects the amount of wood waste; it is especially important to reduce losses when working with valuable species;
• Possibility of fine tuning. For accurate cutting, the device must be equipped with a scale with degrees, special rulers, workpiece clamps;
• type. To choose between a circular saw and a band saw, the scale of production, the tasks performed, and the type of wood are determined.

For processing valuable and hard woods, it is better to use belt mechanisms, since they are economical in terms of material. To work with large volumes of material or when increasing speed is necessary, it is better to use disk mechanisms. Do not forget about timely maintenance of any type of wood sawing machines.

Which company to choose

A household circular saw is an ideal choice for the home.
Before purchasing, you need to familiarize yourself with the rating of the best manufacturers of circular saws. Among the companies that are popular among buyers are:

• Bosch;
• Hitachi;
• Husqvarna;
• Makita;
• Metabo.

There are other manufacturers of circular saws, but they are less well known.

The best inexpensive circular saws for the home

There is no need to buy expensive circular saws for home use. Budget models are also suitable. The top best inexpensive saws include the following devices:

• Makita 5007N - is equipped with a powerful engine that provides wheel rotation speeds of up to 6000 rpm.
• DeWALT DWS510K is a powerful budget saw suitable for cutting dense bars and planks.
• Makita 5477NB - the disc spins up to 5500 rpm, which allows you to cut wood of any density.

The average cost of budget saws is 10-12 thousand rubles.

The best circular saws for quality and reliability

DeWALT DWE560 is one of the best circular saws.
Among the most reliable and high-quality models are the following:

• Interskol DP-190. The saw has a power of 1600 W, the diameter of the circle is 19 cm. Allows you to make cuts 60 mm deep.
• DeWALT DWE560. The device is equipped with a 1300 W motor. This allows you to cut any tree.
• BOSCH GKS 190. Cutting depth - 70 mm. Cuts both small and dense bars.

Additional Information! All listed models are equipped with soft start.

The Best Cordless Circular Saws

People who do not know how to choose a circular saw with a battery should pay attention to the following circular saws:

• AEG BKS 18BL-0. Equipped with a disk with a diameter of 19 cm. The rotation speed of the circle is 3500 rpm.
• Makita HS301DWAE. The saw has a 2 Ah battery. This is enough for 4 hours of work.
• BOSCH UniversalCirc 120. The most compact model, which weighs only one and a half kilograms. Used when cutting small planks.

Additional Information! Most battery models last 3-4 years. Then you will have to replace the battery with a new one.

How to choose the right sawing machine for your home and garden

When choosing a machine, it is worth answering several questions:

1. Why is this unit needed?
2. How much can you spend on it?
3. How often do you plan to work?

Based on this, you can find the best option. It is necessary to understand that today there are universal models that allow you to combine several units. It is recommended to buy such devices if the user cannot clearly say how exactly he will use the machine.

The best mini circular saws

Makita HS301DWAE is suitable for cutting dense wood.
To work with small boards, you can use the following models of mini circular saws:

• Status CP90U - used for trimming wood, ceramics, metal, laminate and PVC.
• Makita HS301DWAE - the blade rotation speed does not exceed 1500 revolutions and therefore the model is not suitable for cutting dense wood.
• DIOLD DP-0.55 MF - is equipped with a 550 W motor, which allows you to work with thick bars.

Important! Even though miniature circular saws look cheap due to their small size, they are actually quite expensive.

TOP 10 best woodworking machines for home and garden

Below we will list the most reliable woodworking machines for the home that will help you in your household. With their help, you can process wood, preparing it for construction or processing it for other purposes.

Which sawing machine would you choose or recommend?

Take the survey

1010. DeWALT DW745

It is a completely safe machine that meets most user requirements. There are several protective features here that allow you to save your fingers. When any emergency occurs, one or another sensor lights up, so you can quickly take the necessary actions. If a foreign object gets into the machine during operation, an emergency shutdown is triggered. The equipment is expensive, but it is highly recommended to buy it for beginners who are not confident in their abilities and do not have much experience.

Characteristics:

• power 2,000 W;
• outer diameter 250 mm;
• 4,800 rpm;
• Made in USA.

pros

• high security;
• good performance;
• compactness;
• There are practically no backlashes.

Minuses

• high price;
• there is no soft start.

DeWALT DW745

Video — DeWalt DW745 Unboxing, mini review

Makita MLT100

The Japanese manufacturer offers a high-quality and reliable machine that will work for quite a long time without breakdowns. The model is highly durable and comfortable. The saw can change the height and angle of inclination if necessary. For control, special levers are provided that have a measuring scale. Many people use this device, including on a semi-professional basis, because the accuracy of woodworking is high.

Characteristics:

• made in Japan;
• power 1,500 W;
• 4,300 rpm;
• power cord 2.5 meters;
• weight 35 kg.

pros

• high accuracy;
• convenient machine;
• the saw can change the angle and height;
• long service life without the need for repairs;
• you can find the necessary parts for repairs.

Minuses

• high price.

Makita MLT100

Video – Is MAKITA MLT 100 worth buying, review

PATRIOT TS 255

A good budget device from Russia, which can become an assistant in a private home or country house. It's easy to install to get started. Fixing lumber is easy. The presence of legs allows you to work almost anywhere, no need to look for free space on the workbench. The legs can be adjusted based on need. They change the angle, as well as the height, so you can work even in the open air, if you have something to power it from.

Characteristics:

• power 1,600 W;
• made in Russia;
• saw diameter 240 mm;
• You can change the angle and height of the saw.

pros

• low price;
• convenient use;
• high performance.

Minuses

• There is a lot of noise during operation.

PATRIOT TS 255

Video – Circular machine Patriot TS 255

BOSCH PTS 10

Equipment from this manufacturer meets all safety requirements. It is reliable and durable. Its only drawback is its high price. But, if you want to buy a woodworking machine that will work for a very long time without the need to replace individual components, then you should choose BOSCH machines.

Characteristics:

• made in Germany;
• weight 26 kg;
• saw diameter 250 mm;
• power 2,100 W;
• rotation speed 3,200 rpm.

pros

• minimal backlash;
• high power;
• many settings;
• reliable machine.

Minuses

• a lot of sawdust falls on the floor even when the vacuum cleaner is turned on;
• high price.

BOSCH PTS 10

Video - Buying, testing a Bosch PTS 10 saw

DW 733 DeWalt

This is a multifunctional woodworking machine with high safety performance. The manufacturer is Germany, so the equipment fully complies with EU standards. There are many different sensors that help the user take the necessary actions in a timely manner if an emergency situation occurs. Emergency shutdown is provided.

Characteristics:

• made in Germany;
• weight 34 kg;
• power 1,800 W;
• speed 10,000 rpm;
• planing depth 2 mm.

pros

• high reliability;
• there are many sensors;
• universal type of machine.

Minuses

• high price.

DW 733 DeWalt

Video - DeWALT DW 733, features and setup

BISON sr-330-1800

A Russian machine that is popular because it is an excellent alternative to famous foreign brands. Here there is practically no overpayment for the brand, which is an important advantage. High-quality components are used in production. The machine itself is repairable; finding the necessary spare parts in Russia is not a problem. Two shaft rotation speeds are used. Users note that the unit has excellent stability. There is anti-biting protection with quick reverse for returning the workpiece.

Characteristics:

• power 1,800 W;
• rotation speed 9,000 rpm;
• knives 2;
• planing depth 3 mm;
• weight 40 kg.

pros

• adequate price;
• excellent characteristics;
• device reliability;
• ease of operation.

Minuses

• Quite a heavy machine.

BISON sr-330-1800

Video - Zubr SR-330-1800, review, nuances, setup

METABO DH 330

This product allows you to get a neat workpiece thanks to a system of precise settings. It is easy for the user to set all the necessary parameters before starting work. There is a fast mode for planing the board without the need to get a perfectly smooth surface. But to get an ideal result, you need to work not in fast mode. The machine itself is compact and weighs only 39 kg.

Characteristics:

• made in Japan;
• fine settings;
• weight 39 kg;
• dimensions 500x600x400 mm.

pros

• high performance;
• ease of operation;
• small backlashes;
• safe use.

Minuses

• high price.

METABO DH 330

Video - Review of Metabo DH 330

BELMASH RT800

This product is manufactured in Belarus. The emphasis here is on cleanliness: the built-in vacuum cleaner collects sawdust. They are stored under the bed. You can additionally store tools there, which is important when there is a shortage of space in the garage. This router has no additional functions. CNC is not supported.

Characteristics:

• made in Belarus;
• weight 36 kg;
• cable 3 meters.

pros

• low price;
• emphasis on cleanliness, as chips are stored under the bed;
• light weight.

Minuses

• lack of additional functions.

BELMASH RT800

Proxxon 27112

German technology is high quality and safe. This is a universal milling machine with many additional functions. It supports CNC. The cutter size here is small, so it will not be possible to apply a pattern to a large workpiece. The bed has clamps so that the machine itself is held securely. Lifting cutter. The set includes only one cutter, so to perform more complex work you need to buy additional components.

Characteristics:

• made in Germany;
• CNC support;
• lifting cutter;
• One cutter included.

pros

• high accuracy;
• can be synchronized with a computer;
• suitable for complex work;
• many additional features.

Minuses

• high price.

Proxxon 27112

JET JRT-1

A popular Chinese model that is inexpensive. It is because of the low price that many people buy it. The machine is not considered multifunctional and universal, but this is often not necessary. The product is compact and suitable for home use. The manufacturer has provided the ability to store the unit folded. However, parsing takes a little time.

Characteristics:

• manufacturer China;
• weight 27 kg;
• power 2,700 W;
• CNC is not supported.

pros

• compactness;
• low price;
• Great for the garage or cottage.

Minuses

• standard milling machine without additional features.

JET JRT-1

Video - Table for manual router JET JRT

These are the most popular woodworking machines available on the market today. Of course, there are many other units, so when choosing, be sure to study the offers on the market and read reviews.

The best hand-held circular saws

The following manual circular saws are especially popular among buyers:

• Makita HS7601 - Used for vertical or 45 degree cuts only.
• Interskol DP-190/1600M is a budget model with soft start and power control.
• Makita 5008MG - uses a 1.5 kW engine, spins the disk up to 5500 rpm.

Many people face problems when purchasing a new circular saw. Before you buy such a tool, you need to understand what a circular saw is and which model to choose for your home.

Best sawing machines with stand

These models are distinguished by the presence of special legs. They do not require a stable base and are convenient to use when the machine has to be moved frequently.

Ryobi RTS1800EF

4.9

★★★★★

editorial assessment

97%

buyers recommend this product

The Ryobi machine has a very smart design. The ergonomic handle allows you to quickly change not only the angle, but also the height of the cut. Table dimensions - 650x710 mm. A compartment for storing components makes it easy to start using the machine in a new location. The stable design is not afraid of vibration when processing dense workpieces.

Engine power - 1800 W. Smooth start eliminates the risk of jerking. Overload protection extends engine life under regular heavy use, and an emergency shutdown button provides additional operator safety.

Advantages:

• long service life;
• powerful engine;
• vibration resistance;
• flexible setup;
• safe work.

Flaws:

• heavy.

The Ryobi RTS1800EF is suitable for precision cutting of wood workpieces in a professional workshop.

Encore Corvette 13M

4.9

★★★★★

editorial assessment

94%

buyers recommend this product

The model's disk is protected by a transparent casing that protects the owner from injury. The parallel fence moves along the table, which ensures accurate cutting along the entire length of the workpiece. The presence of two extensions allows you to increase the working area for comfortable sawing of large-sized parts.

Motor power is 1500 W, spindle speed reaches 2950 rpm. A special scale with a pointer is used to adjust the angle of inclination of the disk.

The machine is equipped with transport wheels, which make it possible to quickly move it to the desired location. Compatibility with dust extraction equipment makes cleaning easier.

Advantages:

• excellent stability;
• robust design;
• ease of movement thanks to wheels;
• neat sawing;
• ease of maintenance.

Flaws:

• high price.

Enkor Corvette 13M is designed for transverse and longitudinal sawing. Suitable for home or small production.

Hitachi C10RE

4.8

★★★★★

editorial assessment

90%

buyers recommend this product

The table of this model is made of cast aluminum, is not subject to corrosion and is resistant to heavy loads. Its area can be increased thanks to special extensions on both sides. The presence of rollers makes it easier to move around the work area.

The motor power is 1600 W, the spindle speed is 4800 rpm. The compartment built into the body allows you to store tools and additional accessories: disk, power cable, angle stop, guide.

Advantages:

• small dimensions;
• ease of transportation;
• safety of use;
• large-sized table;
• thoughtful tool storage system;
• high strength.

Flaws:

• difficult to maintain.

The Hitachi C10RE machine is suitable for a small workshop engaged in small-scale production.

Black+Decker BES720-QS

4.8

★★★★★

editorial assessment

87%

buyers recommend this product

The model has a high level of safety during operation. It is ensured by the presence of an emergency shutdown button, a push bar, a guard guide and a protective saw blade guard. You can work with workpieces at an angle of up to 45°.

With a motor power of 1800 W, the spindle speed is 4800 rpm. The built-in dust collector helps keep your work area clean. The metal table has a retractable part for the convenience of sawing large-sized parts. The rip fence guarantees a precise and neat cut.

Advantages:

• flexible setup;
• neat sawing;
• good vibration resistance and generally robust construction;
• operator safety;
• presence of a dust collector.

Flaws:

• no soft start.

Black+Decker BES720-QS is suitable for occasional use in a private workshop.