3D deer head made of plywood. Templates for cutting

Drawings of a deer head made of plywood: choice of material and installation details

When decorating premises, you need to pay attention to even the smallest details. The fact is that a small decorative item will make you look at the room completely differently, giving it a certain style intended by the designer. Taking this into account, recently items such as a deer head made of plywood and other similar products made from this material have become especially popular.

Amateur photo of a decorative element in the form of a deer’s head made of plywood

How to make animal heads from plywood: rhinoceros, deer, elk, bull

Nowadays, you can decorate your home with original accessories and handmade crafts. Products in the form of animal heads made from plywood look original and very attractive. Let's talk in this article in more detail about how to make animal heads from plywood: rhinoceros, deer, elk, bull

Artificial taxidermy

Today, having a stuffed dead animal in your home is no longer fashionable. Such products were replaced by bright and impressive animal heads made of plywood, plaster and other materials, made using the method of artificial taxidermy. Look at the following photo to see the originality of such crafts.

Today a person of any income can have such an animal in his apartment or country cottage, because you can make it with your own hands from sheets of plywood.

Recently, humanity has been striving to move away from cruelty to animals for the sake of their stuffed animals, skins and fur, preferring an eco-strategy for the development of the fashion industry and interior design. In addition, green supporters and animal activists do not protest against bulky plywood accessories.

And really, look around. In many cafes and restaurants, seeing the head of a rhinoceros or deer, created by the hands of a craftsman from sheets of plywood, is not such a rarity.

A deer head made of plywood or figurines of other animals can create a warm atmosphere in the interior of any living room or bedroom. And there is absolutely no need to sacrifice a living animal for this. You can make an original accessory with your own hands without harming the environment.

Peculiarities

Gorgeous green lion made of plywood

Elephant, deer and elk

The death of a wild animal is too high a price to pay for creating a cozy atmosphere in the house. It is better to make the head of an animal such as a deer or rhinoceros out of plywood.

Of course, you can purchase a ready-made three-dimensional craft, because such plywood sculptures, in the best traditions of labor lessons, are sold in many souvenir shops. You can also order a bull or elk head of different shades and textures in online stores.

But if you don’t want to overpay and want to show your individuality and sense of style, you can use the instructions for creating animal heads from plywood sheets. To do this, you will need drawings of a plywood head, a regular jigsaw, paints, varnish and, if desired, rhinestones or stones for decoration.

Where to find the drawing

You can try to find such a scheme in magazines on design and interior decoration. But this is not an easy path that takes a lot of time. It is much easier to turn to the Internet, which is replete with many drawings for creating such crafts. So on many forums of craftsmen and designers you can find drawings of a rhinoceros head made of plywood.

We do the work with our own hands

The original rhinoceros head made of plywood, as in the following photo, can be made by you yourself. You just need to find the appropriate diagram.

So, if a diagram is found, then it needs to be printed on paper. Next, the resulting parts are cut out using ordinary scissors and applied to a sheet of plywood. They will need to be outlined with a simple pencil.

Now comes the most painstaking work. You need to cut out the details of the future craft using a reciprocating saw or a regular jigsaw according to the drawing. The blade should be secured to the jigsaw as tightly as possible, and then, moving strictly along the contour, cut out the blanks.

If you have the opportunity and desire, you can apply a through pattern to solid parts using a milling machine. The following photo shows a development of a plywood head.

Do not forget that when cutting out the workpiece, you need to leave about 1 cm of allowance, because the edge of the parts should subsequently be processed and polished using sandpaper. Why is this necessary? To make the voluminous head of a bull made of plywood look more neat and attractive, because paint or varnish will adhere better to a smoother surface.

Also, special cuts must be made on the parts, as can be seen in the diagram, in order to then insert smaller parts into larger ones.

If you are carrying out work for the first time, without having had similar experience before, experienced craftsmen advise having several spare parts in case you damage one of them during connection.

At the next stage of work, the parts are combined into a single whole according to the drawings, moving from large parts to smaller ones, to create a real animal head made of plywood.

When the plywood or buffalo elk head is assembled, all that remains is to paint it with acrylic paint, gouache or spray can. The choice is yours. If you wish, you can decorate the craft with stones, colored glass or rhinestones.

Where to hang

An artificial trophy can be an excellent alternative to a stuffed animal and an original decoration for almost any room in a city apartment or country house.

Such products look great in living rooms and bedrooms. Such an accessory will definitely cause a lot of positive emotions and delight not only among apartment residents. Give up boring pictures and dull vases with artificial flowers by hanging a real treasure of modern interior design in your room.

Do you want to emphasize your individuality and original taste? Decorate your washroom with a rhino or bull head made from plywood. Also, such structures can be hung in bathrooms, but then they still need to be varnished so that under the influence of moisture the plywood sheets do not dry out and become moldy.

But for children's rooms, not warlike heads, but colorful and bright heads of those animals that the baby likes more than others are suitable. It could even be a fictional animal, decorated with all kinds of pendants, stones and beads. The main thing is that the child is happy with such decoration, and the room acquires an attractive and cozy look.

The video below provides detailed instructions for creating animal figures from plywood sheets.

Source: https://thefanera.ru/izdeliya/golovy-zhivotnyh-iz-fanery

Material

If there are men's hands ready to help you, then the deer's head can be made of plywood, since you will have to work with a jigsaw there. If this option does not work, then you can get by with regular cardboard. These are the most optimal materials for this purpose.

But if it is possible to make it from plywood, then it is better to opt for it. After the structure is ready, it can be treated with impregnation, painted, and the decoration will look very beautiful. In addition, the final appearance of the product largely depends on the paint. If you decide to use several colors, it will look even better.

3d deer head made of plywood. Cutting templates – Finishing

All photos from the article

For a long time, it has been customary to decorate the interior of a room with hunting trophies. After a successful hunt, they made a stuffed animal with their own hands, which was hung on the wall and for a long time testified to the skill, accuracy and luck of the shooter.

Today the situation has changed radically, since many animals are under state protection and their shooting is prohibited. Of course, you can buy a stuffed animal of one or another part of a killed animal, but the price of such a trophy will be high.

Moose head made of three-layer plywood

In this article, we offer an alternative to buying expensive stuffed animals, because a deer head made of plywood will look much more original and modern than a stuffed animal stuffed with straw. In addition, you can be proud that no animals were harmed when decorating the interior of your living room.

We remember school labor lessons or what can be made from plywood

Example of using a hand jigsaw

Many readers of this article during their school years had to attend labor classes or handicraft clubs and cut something out with a jigsaw for wood. If you have experience in such activities, then you can easily cope with the work that we will discuss below.

If you have no experience working with a jigsaw, let us explain that a manual jigsaw is a tool designed for delicate cutting of thin lumber. Structurally, it consists of a metal frame with a handle, and a narrow, fine-toothed blade is clamped between the ends of the frame.

The advantage of a narrow blade is the ability to cut lumber both starting from the edge of the sheet and indented from the edge. In this case, a through hole is drilled in the sheet, into which the canvas is inserted. As a result, it is possible to make complex figures, for example, a deer’s head with an eye, to which there is no cut from the edge of the sculpture.

If you have a jigsaw and drawings of a rhinoceros head made of plywood, you can easily turn your design idea into reality with your own hands

Below we will bring to your attention several instructions from which you can choose the craft that will fit into the interior of your living room.

Assembly instructions

Scheme for making a deer with dimensions

Perhaps, let's start with the most common hunting trophy and look at the drawings of a deer head made of plywood. Making a deer, as well as other animals, is creating a kind of 3D puzzle. That is, a certain number of parts are made from lumber, which are assembled into a single structure.

Scheme with numbering of parts in order of priority during assembly

The manufacturing instructions are as follows:

we draw out the details shown in the diagram on three-layer plywood;
cut out the parts with a jigsaw;
we grind the ends of the parts, making them smooth and neat;
we cut out a shield from five-layer plywood on which the entire structure will be attached;
We attach 3 parts to the shield with self-tapping screws, which together form a “neck” that goes into the head;
We insert transverse parts into the grooves on the “neck”, which form the appearance of a three-dimensional sculpture and at the same time provide additional strength to the structure;
If the assembled sculpture is similar to the version shown in the following photo, we disassemble the parts, sand them, coat them with wood varnish and put them back together.

Finished craft mounted on the wall

Despite the large number of details, making the sculpture is not difficult. Moreover, a correctly made head can not only be assembled, but also, if necessary, disassembled.

3D deer head made of multi-colored plywood

In this photo you can see a deer head made in a different way. Here, the cut out parts are not placed on a transverse base, but are glued to one another. How much the sculpture will protrude depends on the number of parts prepared for gluing.

Making the head of an elephant, dragon and other animals

Talking about drawings of animal heads made of plywood, let's look at the assembly diagram of an elephant's head.

Diagram of parts for assembling an elephant and a dragon

The diagram is sketched by hand, but it is not difficult to understand what this or that detail looks like. The dimensions are not indicated so that you can decide for yourself how big the hunting trophy will be on the wall in your room. But you need to take into account that the larger the sculpture, the thicker the plywood used for its manufacture should be.

The photo shows an elephant assembled and mounted on the wall

The load-bearing part in the design is the head with the trunk. This part is cut out in two pieces and the rest of the transverse parts are attached to it.

By the way, on the same hand-drawn drawing there is a diagram of a dragon's head made of plywood. It is enough to transfer the image to cut lumber, put together the puzzle and the dragon's head will be ready.

To make the assembly of the craft easier and guaranteed to be successful, we present to your attention a sketch made of paper.

Paper model of what can be made from plywood

After we have familiarized ourselves with the diagrams for making a deer, an elephant and a dragon, do we need drawings of a bull's head made of plywood in order to make another decoration for decorating the walls?

This bull's head is made from plywood using the same principle as other crafts.

Of course, additional drawings are not needed, since with imagination, you can redraw the deer’s head into a bull’s, making the original version wider. In addition, you will have to slightly modify the antlers, which on a bull are not as spreading as on a deer.

Recommendations for working with plywood

When cutting out small parts, avoid using a jigsaw, as a large blade can cause chipping;
To create sculptures, we recommend using birch plywood, since the price of such lumber is low and they are easy to process;
When making large sculptures with a large number of parts, assemble using adhesive joints;
Before painting the finished product with a solid color, the wood should be primed;
When covering a product with varnish, instead of a primer we use a stain of a suitable color.

Conclusion

Source: https://ko-2.ru/materialy/3d-golova-olenya-iz-fanery-shablony-dlya-vypilivaniya.html

Varnishing crafts

If desired, you can transform our craft by covering it with Wood Varnish, preferably colorless. Read how best to varnish a craft. Try to choose a quality varnish. Varnishing is carried out using a special brush “For glue”. Take your time. Try not to leave visible marks or scratches on the craft.

Moose head made of three-layer plywood

Craft drawing “Deer Head”

Try cutting out a deer head like this.

The work is difficult

Your loved ones will surely like this craft by placing it in a visible place, for example, on a shelf. To make this craft you will need the following:

Sawing tools.

Preparing your desktop

First of all, you need to prepare your table on which you will work. There should be no unnecessary things on it and every tool should be at hand. Not everyone has their own desktop and has probably already thought about creating one. Making a table is not difficult, but choosing a place for it in the house is difficult.

The ideal option is an insulated balcony, on which you can do crafts at any time. I have already written about preparing the table in a separate article and tried to describe in as much detail as possible the entire process of creating it. If you don’t know how to prepare your workplace, then read the following Article.

After you have completed the process of creating a table, try to start choosing your future craft.

We choose quality material

The main material is plywood. The choice is always difficult. Each of us has probably encountered such a problem as delamination of plywood from the end part and asked the question, what causes this delamination? Well, of course, this is mainly due to low-quality plywood.

If this is not the first time you have picked up a jigsaw, then you can select plywood from the remnants of a previous craft. If you are new to sawing and you don’t have plywood, then buy it at a hardware store. Choosing material for sawing is always difficult.

You should always choose plywood carefully, often look at the defects of the wood (knots, cracks) and draw conclusions. The difficulty in choosing plywood lies in the fact that no matter how you guess at its defects and shelf life. For example, you bought plywood, cleaned it, translated the drawing and suddenly it began to delaminate.

Of course, this has happened to almost everyone and it’s oh, how unpleasant. So it is better to pay attention when choosing and choose good plywood. I wrote a special Article in which all the principles of choosing plywood are described step by step.

Stripping plywood

We clean our plywood with sandpaper. As you already know, “Medium-grained” and “Fine-grained” sandpaper is used for cleaning plywood when sawing. You've probably seen sandpaper in hardware stores, and that's what we'll need.

In your work you will need “Coarse-grained”, “Medium-grained” and “Fine-grained” sandpaper. Each of them has its own property, but a completely different coating, by which it is classified. “Coarse-grained” sandpaper is used for processing rough plywood, i.e. which has many defects, chips, and cracks.

“Medium-grained” sandpaper is used for processing plywood after “Coarse” sandpaper and has a slight coating. “Fine-grained” or otherwise “Nulevka”. This sandpaper serves as the final process for stripping plywood. It gives the plywood smoothness, and therefore the plywood will be pleasant to the touch.

Sand the prepared plywood in stages, starting with medium-grain sandpaper and ending with fine sandpaper. Sanding should be done along the layers, not across. A well-polished surface should be flat, completely smooth, glossy in the light and silky to the touch.

How best to prepare plywood for sawing and which sandpaper is best to choose Read here. After stripping, check the plywood for burrs and small irregularities. If there are no visible defects, then you can proceed to the process of translating the drawing.

Translation of the drawing

For me, drawing translation has always been the main process in my work. I will tell you a couple of rules, as well as tips for high-quality translation of a drawing.

Many people transfer the drawing onto plywood not only using a pencil and copying, but also using “Black Tape”, glue the drawing to the plywood, then wash off the drawing with water and the markings of the drawing remain on the plywood. In general, there are many ways, but I will tell you about the most common method.

To transfer the drawing onto prepared plywood, you must use a copy, a ruler, a sharp pencil and a non-writing pen. Fasten the drawing in plywood using buttons or simply hold it with your left hand. Check if the drawing fits the dimensions.

Arrange the clock drawing so that you can use a sheet of plywood as economically as possible. Translate the drawing using a non-writing pen and ruler. There is no need to rush, because your future craft depends on the drawing.

Drilling holes in the parts

As you have already noticed, the parts contain parts of the grooves that need to be cut out from the inside. To cut out such parts, you need to drill holes in them using a hand drill or, as in the old fashioned way, make holes with an awl.

By the way, the diameter of the hole must be at least 1 mm, otherwise you can damage the elements of the drawing, which, alas, are sometimes difficult to restore. To avoid damaging your work table when drilling holes, you must place a board under the workpiece so as not to damage the work table.

It is always difficult to drill holes alone, so ask a friend to help you in your task.

Sawing parts

There are many rules for cutting, but you need to stick to the most common ones. First of all, you need to cut out the internal parts, only then according to the external pattern. There is no need to rush when cutting. The main thing is to always keep the jigsaw straight at a 90-degree angle when cutting.

Cut out the parts along the lines you accurately marked. The movements of the jigsaw should always be smooth up and down. Also, do not forget to monitor your posture. Try to avoid bevels and unevenness. If you go off the line while cutting, don't worry.

Such bevels and irregularities can be removed using flat files or “coarse-grained” sandpaper.

Rest

When sawing, we often get tired. Fingers and eyes, which are always tense, often get tired. When working, of course, everyone gets tired. In order to reduce the load, you need to do a couple of exercises. You can view the exercises here. Do the exercises several times during work.

Cleaning Parts

You should always clean the parts of a future craft carefully. At the very beginning of the work, you already sanded the plywood with sandpaper. Now you have to do a small part of stripping the plywood. Using medium-grain sandpaper, sand the edges of the parts and the back of the plywood.

“Fine-grained” sandpaper is considered the final stage of cleaning parts. It is better to clean the front part of the parts with fine sandpaper. When processing plywood, take your time. You can also use a rounded file, which is convenient for cleaning the inside of the holes.

Try to ensure that the parts come out without burrs or irregularities.

Assembly of parts

Assembling the parts of our craft is not so difficult here. In order to correctly assemble the parts, you need to read the following Article, which describes in detail all the details of the assembly. After the parts are assembled into one common craft without any problems, then start gluing them.

Gluing the parts

The shelf parts must be glued using PVA or titan glue. You don't need to pour a lot of glue. It is better to tie the assembled craft with glue with a strong thread, tighten it and lay it out to dry. The craft glues together in about 10-15 minutes.

Burning out crafts

To decorate our craft with a pattern (for example, along the edges of the craft), you will need an electric burner. It can be very difficult to burn a pattern beautifully. To burn patterns, you must first draw the pattern with a pencil. You can read how to work with an electric burner and add patterns to a shelf here.

Varnishing crafts

Buy a drawing of a deer head made of plywood.

Price 50 rub.

Formats:

Volume: 40 sheets A4 format.

Downloading will be available after payment. The file will be duplicated to your e-mail.

Source: https://chudo-lobzik.ru/chertezh-podelki-golova-olenya/

Knitted deer amigurumi

An unusual New Year's toy will be made from yarn. Knitted deer will come out large and voluminous, making a wonderful New Year's gift for adults and children. It is better to crochet a deer, starting the process of creating a toy 3-4 weeks before the New Year.

MK author: Svetlana Bozhko

Each part - head, horns, body, hooves and tail - is knitted separately and then connected using threads of yarn. A padding polyester or other filler is placed in the middle to give the deer volume.

Author MK: Oksana

Eyes, ears and a nose are sewn onto such a toy. They must be attached to the deer's head before the product is fully assembled.

MK author: Natalya Morozova

Deer head made of plywood: choosing a drawing, cutting and assembly, where to buy a ready-made one

A deer head made of plywood is created in beige or with a paint coating. It differs from the usual form, ensuring satisfaction of the requirements for creating an interior in a hunting style. To make a decorative element yourself, you will need to prepare individual parts cut out according to a template.

Plywood deer head

Drawing selection

The deer head made of plywood in the drawings attracts with its original design and variety of parameters. They match the appearance of the building. Selecting large parameters stands out strongly on the walls and gets in the way. The design of small sizes will be similar to a toy.

The plywood deer head template corresponds to standard parameters that reflect real objects. That is, after assembly the product coincides with the original.

The number of details included in the decoration is taken into account. There are situations when two externally identical products have a different number of elements.

Plywood animal head

If you create a deer head from plywood with your own hands, instructions or an explanatory note are attached to each diagram. It displays the most complex parts or connections, allowing you to describe the method of their development.

Attention!

Experts recommend initially making all the parts from paper and assembling. In the future, these elements serve as patterns for working with plywood.

Material for production

If you need a deer head made of plywood, buying the product will not be difficult. However, it is cheaper to reproduce the product yourself. The work uses a plywood panel treated with impregnation and paint. To give maximum effect, several shades are used.

Deer head made of plywood boards

In some cases, you can use bakelite-based plywood, as it has moisture-resistant properties. But this preparation is very wasteful. They are used to decorate façade surfaces or garden plots.

The glue is selected from ready-made offers or created on the basis of PVA. After development, the product is protected from moisture. For this you need impregnation and paint.

If plywood is used for facades, a bakelite-based material that can be painted is selected for this purpose.

Before applying the primer, the structure is treated with a fine abrasive. This helps to correct edges and eliminate lint on the coating.

Plywood trophy in the form of a deer's head

What else will be needed during the manufacturing process?

In addition to a plywood sheet and a photocopy of the drawing, you need to prepare copy paper, a non-writing pen, a sawing table, a jigsaw, abrasive sandpaper, a file, a sharp knife, PVA glue, an awl, a 4 mm drill, a drilling machine or an electric drill.

Preparing a sketch

The pattern is printed in real scale (44 - 48 cm). The layout will fit on an A2 sheet. If it is not possible to print in this format, the drawing is divided into separate sketches placed on A4. The sheets are glued together into a single drawing and then cut out.

If you have a good stationery knife, cut out elements from cardboard panels according to the pattern. The width of the slots for joining products corresponds to the width of the plywood. This should be taken into account when cutting. You will need 2 parts for the second pattern.

Plywood decoration in the form of an animal head: diagram

Elements of the finished structure are assembled. They should be numbered first. Using template elements, you can assemble a plywood product.

Based on the external appearance of the deer, you can paint, paste, apply a design, or leave it in its original form.

Features of applying a pattern to the material

The main requirement for pressed solid wood slabs is a smooth coating that excludes visible defects. Typically, pressed plywood is used to create decorative products. Sanded plywood elements with a layer of 4 mm and 6 mm can be replaced with an 8 mm solid. The assembly of volumetric products is carried out “groove to groove”.

Deer head made of plywood boards

After selecting the base for cutting, the drawing of the first element is applied. Its blank had already been previously found on the Internet and then printed out on a printer.

The outline of the workpiece is cut out using a stationery knife. The drawing is fixed on a plywood sheet using double-sided tape or PVA glue (it is not recommended to carry out permanent gluing, since the sketch will be removed in the future). Use a marker or pencil to trace the outline.

Upon completion of the work, regarding drawing the outline, the paper figure is removed from the sheet and the design is cut out.

What's the best way to cut

To work with plywood, use a jigsaw:

Manual. A simple and understandable tool designed for household purposes. Any beginner can easily handle it.
Jigsaw. Using an efficient and fast device allows you to create figures in the shortest possible time.
Stationary product. Used to create high-quality drawings in a short period of time. The main criterion is the presence of a bed and rigid fixation of the saw.

To carry out the process, a nail file is inserted into the jigsaw - made of metal, coated with diamond. A small gap is made in the drawing on the raw material for inserting a nail file and cutting is carried out along a given contour for cutting out of a plywood sheet with a jigsaw.

Subsequently, the figure is carefully cut out along the previously created contour, ensuring smooth bends.

Plywood decoration in the form of hunting treofey: cutting

Tenon joints

At the end of the marked eye, at a distance of 2 mm, a through gap with a cross-section of 4 mm is drilled.

The groove is cut using a jigsaw. The jigsaw file moves from the inside of the marking.

After the cut has been formed, it is necessary to ensure control using a sanded piece of plywood from the workpiece. This template fits tightly into the groove.

Where can I buy

Among the companies offering to purchase a deer head made of plywood, we can highlight the following distributors.

For sale is a decorative deer head made of plywood. You can buy a handmade product in 9 color options, made like a 3D puzzle from sheet material, 4 mm thick.

Location:
st. Novocheremushkinskaya 17, Moscow
Call here:
(495) 10 599 11
Find out more:
https://dg-home.ru/

Location:
st. Atamanskaya 3/6, St. Petersburg
Call here:
(812) 30 997 94
Find out more:
https://zpos.ru/

Source: https://profanera.ru/montazh/golova-olenya-iz-faneryi-vyibor-chertezha-vyipil-i-sborka-gde-kupit-gotovuyu.html

New Year's deer Tilda made of fabric

Fabric, like felt, is used to make New Year's toys using appliqué or sewing. The latter option is more popular, but it is only suitable for people who know how to handle a thread and needle or a sewing machine. To obtain such crafts, only natural fabric is used, from which a deer is sewn and then the middle is filled with holofiber, cotton wool or padding polyester.

Drawings of a deer head made of plywood: choice of material and installation details

Amateur photo of a decorative element in the form of a deer’s head made of plywood

Practical application and appearance

To begin with, it must be said that these designs look quite original on the wall and give it a special appearance. The fact is that a plywood head is not a hunting trophy and does not evoke feelings associated with killing animals.

At the same time, it visually differs from the usual form, creating an interior of a new style without making major changes to the layout. Scheme for creating such structures, presented in the form of separate elements

Blueprints

First of all, you need to choose the right drawing. At first it may seem simple, but there are certain rules for proper interior design.

Such elements have an original appearance and differ significantly from the original trophies

Particular attention is paid to sizes.
The point is that they must match the appearance of the room. A structure that is too large will stand out and get in the way, and a small product will simply turn into a decoration or a toy.
Typically, drawings come with standard dimensions that correspond to the actual items.
For example, a plywood elk head after assembly will completely correspond to the original trophy. That is why professional craftsmen advise recalculating all sizes according to needs.

When using a good dye, you can give the structure a stunning appearance.

You should also immediately pay attention to the number of elements that make up the product.
The fact is that two seemingly similar drawings may have a different number of components. Moreover, this factor will significantly affect the amount of material, which will also affect the cost.
Each drawing is usually accompanied by instructions or an explanatory note.
It points out elements that are difficult to manufacture or connecting units of increased complexity, describing the methodology for their creation. Such documentation is very important in your work, as it allows you to avoid many mistakes. (See also the article Plywood horse: features.)

Advice! Professional craftsmen recommend first creating all the elements from paper and trying to assemble the structure.

Subsequently, these parts can serve as patterns when working with plywood.

Applying structural details to plywood for subsequent sawing

Conclusion

By watching the video in this article, you can get more detailed information on how to make a similar decorative element from plywood according to the drawings. Also, based on the text proposed above, it should be concluded that there is nothing complicated in this work, and even a beginner can cope with it if he has the necessary documentation. However, it is necessary to have the skills to read drawings and understand the design features.

Similar materials